Mud Time

It's winter and I have the binnacle off the VSTAR as the first part of the tear down. Should have pictures as I go. I'm excited to start tearing off paint and getting that dent sorted.

Meanwhile, I also need to get Lindsay's old CT70 running. It's just about all complete but the wiring needs work and I think I need to clean carbs and the fuel line after years of abuse.

Once it is up and running, I'll be looking for a dirt bike of my own. I don't have one and I don't plan to start brand new. I'm not jumping or racing, but I would like something to play in the mud with and to go up logging roads exploring.

Reading the ADV sites, a couple of bikes have my interest even though I'm not a dirt bike guy. Here's the buck list -- or my Craigslist Wish List:

TW200 : Yamaha is still making these -- and have been since I was in high school -- virtually unchanged. They are trail thumpers that are easy to ride, impossible to kill and reportedly very fun to have around. I'm tempted to sell El Burro for a pair of these and get Amy riding with me.

The XL Hondas look just modern enough without looking like a pointy-plastic Asian appliance. The XL600 R would be a great Dual sport, especially if I could find one to restore in the Red-White-Blue of the Paris-Dakar trim. The Red Engines Made 'Em Better. According to the forum on ADVRider, they will keep up with modern 650s for the most part and are actually lighter than the Hondas that came after. I think they'd be a blast on the logging roads or out in the fields. 

NX 250 - 650

These days Dominators are getting chopped up into streetfighters all over the world. Yet, I love their fairing up front and trail bike stance. I think it would be great to have one of these. In fact I almost went south into Oregon to buy an NX250 the week I bought El Burro. 

Honda Transalp in the form of my teenage dreams.

TransAlp

Rare. Beautiful. This was the motorcycle in the Honda shop when I was a teenager that called my name but I could never take home. They only imported them to the US for a few years, but sold them like hotcakes around the world. Would love to get my hands on one for long range adventure touring. 

Let there be lights!

I needed a bit more light on the front end this time of year as the sun starts setting later in the day. I picked up some yellow fog light from Bulletwala.com and some frame clamps. I wired straight into the blue wire so the are always on. The lollipops only come on when turning.

New Paint Ideas of El Burro

"I like it red," Amy says and I let that be the last word on a debate going on in my mind.

The inspiration for El Burro?

With the rust and the dents in the tank, the Burro is going to need a paint job, and that's the fun of buying an old bike -- making it my own.  For a few hundred more, I could have had a garage queen, but chose the donkey that had been ridden 25,000 miles instead.

My V-star 650 classic will need a paint job, and like my last build, I want to do it myself. So what color?   Blue or Red Motorcycle? A question as old as time. 


It is red over purple now. I thought a dark matte blue would be cool and even painted the side covers that color, but I also return to my first impressions. When I was driving bike home in the back of the truck I saw it as a crimson and gray tribute to my alma matter - Washington State University. 

I don't want to do a traditional chromed out custom, or a matte black monster. Custom means you take other people's ideas and let the source material speak to you, tell you what it wants to be. My crimson and gray paint scheme will take it's cue form the current Cougar uniforms which are bad ass.  I especially like the gloss gray over matte gray of the alternate helmets - would like to incorporate that somehow.  I even found a website that has the hex numbers for the branded colors, so I can get a pretty good match.

So, now that I've decided on Crimson and Gray - what style? Well, here are some inspirations. This is the bike The New Blood from Deus Ex Machina. I love the matte red and pearl and think my bike would look great with the same style in Crimson and Gray. Deus did an earlier Harley custom with an all gray finish, which is my other main inspiration - Their 1200 V-Twin Cafe Racer.

I also like some of the designs from Shaw Speed - especially the Flatliner and other more retro builds.

Shaw uses bullet lights mounted under the mirrors and I like that look. It cleans up the front end and gets rid of the lollipops.

Brighter LED turn indicators should help make me more visible to a texting driver getting ready to make a turn. The Deus boys tend to hide their indicators, which is fine when you are not battling fog on a "summer" day like today. One the handle bars, they integrate better. Smaller but brighter is what is in my mind for both the front and the rear of the bike.  I can run the electrics from the signals down into the handlebars along with the other wires when I cover the loom. Should look pretty cool, but the test will be when I look at how much work it will be do get rid of the old indicators up front.

Moreover, I have a nice set of passing lamps I purchased from down under. Should I put them on - using the existing light bar, or should I keep the front end clean? Decisions - decisions. That's why I'm happy to let Amy make at least on key choice for me.

For want of a bolt.

It's a convoluted story, so here goes. I bought a fairing off Ebay. It didn't fit the classic, so I sold it to a buddy with a Vstar 650 custom. While I was looking at it, however, I decided to take off the fairing mounts left on by the previous owner. Three of the four mounting bolts came off without a hitch. The fourth bolt was stripped. I spent a day on one bolt. Finally broke the head off, then I started in with the EZ Out borrowed from my father in law. Broke the EZ Out.

So I just bought another tripple tree crown. When I get it, I realize I haven't put the new risers on yet .. and they won't come out of the old one. In fact, even with a "tap" from a hammer, they won't budge. Screw this - ebay - new risers.

By the time they come in the mail, I've missed the better part of a month of riding because of one damn little bolt. I put it all together and it works great ... except I have almost no front brake -- somewhere when the handlebar was off, I lost my brake fluid. (sigh)

These little frustrations slow me down, make me think about where I want to go with this bike, what I want it to look like. I am making it a point to replace every bolt with a new one as I go. Slowly but surely, I will leave this bike better than I found it.

De-purple

Okay so I got some Rustoleum hammered paint and wanted to try it out. I also have these purple side panels on the vstar and I hate purple. I used WD40 and a blow dryer to remove the stickers then scuffed the plastic with some 400 grit. Two layers of the hammered look good but I will probably cover it with a darker color eventually when I do a full repaint. Hard to see in the pics but the hammered does make the plastic look like metal -- I'd call it more pitted than hammered -- but that might be due to temp and humidity where I was painting. I've got to make myself a paint booth before I do the whole rig.

Paint Ideas

Not my bike, but I do like green. (Blue Collar Bobbers)

As you can see from the previous post, there is a rust on the tank and a few other places on this bike which I'll have to clean up. The tank itself has a bunch of little dents all over and one big one. As I repair, I am going to need to repaint as well and high gloss paint is not going to be my friend. Instead, I've been looking at some of the alternatives popping up in recent bobber customs. I like bobbers to some extent, the lack of chrome and utilitarian nature in particular. However, every trend in motorcycle building leads to excess.

Blue Collar Bobbers features some nice designs to showcase their kits. I particularly like the paint job on this bike, perhaps because it is so different from anything else I've come across. And, I like green.

My last bike came out blue and gold ... two colors I like and the school colors of Naselle. "Comet colors" my girls say. When I first bought this bike, they both insisted I paint it blue and gold. Here's another from the Blue Collar website that I like.

 From Blue Collar Bobbers.

Of course, getting the white tires might be tricky.  1912 Harley From Vintagebike.co.uk

Of course, my bike is maroon and purple (although it is so dirty it looks black.) Got me thinking early on about going with crimson and gray of my alma mater Washington State University. I think a gray enamel frame and paint scheme would also hark back to the Silent Gray Fellows of the earlier years ... or not.

The folks down at Deus Ex Machina recently brought back the Harley gray with their wonderful V Twin Cafe Racer custom. I love the muscular nature of this concept, but it is really the gray paint that stands out. Looks almost like a powder coat and I think it would look amazing on the Vstar. Be sure to click the image for closer up views.

Big engine, light weight, no chrome. That's how I like my motorcycles.a powder coat. 

El Burro Restoro Update

New bike stand from Boss Power Outlet on Ebay. It's cheap and works great

I just came inside from tucking El Burro in for the night. The temp is supposed to get down in the 20s tonight and it is forecast to be rainy and blowing in the morning. I've been busy before and after work doing little things and surveying everything that needs fixing. I bought a bike stand - cheap and easy - and a mirror on a stick to check the oil sightglass while riding. I also bought a cover -- since my garage is waterproof but just barely and less so during a big storm. I repaired the  neutral switch which stopped the oil leak. The directions here at  Zia Rider  were invaluable.

 Tonight I changed the oil - very easy, but I noticed a few bolts were missing! Just the engine covers, but I bought some new ones to replace the missing parts anyway.  Next up: Tear down, clean up, rust hunting and adding the sissybar. 

Dents I don't mind. Rust needs to go. I'll pull the tank, strip it to the bare metal like I did with the Honda.

Here's the bike stand in action. 

There are bits of rust you can't see in the pictures. The wiring from the handlebars is rust-stained too. 

This bike once had a windshield - the mounting plates are still on either side of the headlight.

The bike stand made the oil change a piece of cake. Need a long-handled allen wrench set to change the oil filter.

Bolts missing from the the side covers.

For as bad as the dents and rust on the bike. The seats are in great condition.

Rust monster.

I wasn't going to do anything to the binnacle until I realized it was plastic and the chrome was peeling on the  right hand side. Maybe I'll sand it down and paint it brushed aluminum or flat black.